Know Everything About Garage Door Repair In Sterling, Virginia

The main thing about repairing your garage door is to know the right techniques and tools to do it. The first important thing is to check the wires to see if they are loose and if you need to replace them. Then you should check the springs if they need to be adjusted. If the door no longer slides then you should check the rollers and cables that are connected to it. All of these are problems that will require garage door repair.

You should remove the hardware from the pulleys as well as unscrewing it. It would be a good idea to use a screwdriver to do this. Now that the hardware is removed you should proceed with a garage door repair. You need to locate the area where the rollers are controlled and this can be done by pulling the torsion spring and sliding it to the side. Now you need to get to the section where the tracks meet and loosen it.

This requires you to use a flat head screwdriver to unscrew it. Once the screws are loosened, you should proceed to pull the pulley system up as well as the tracks. You should use a drill as well to attach them back onto the torsion spring. Now you can tighten all the screws again. You may want to use a lock washer as well to further secure it.

Another important step involved in doing garage door repair in Sterling Virginia is to make sure that the cables are also adjusted properly. This is because if the cables are not in alignment they will work improperly and will result in your garage door not opening or closing. If you don't do this step then your garage could be seriously malfunctioning. In addition, loose cables could cause other issues like your vehicle not responding when you press the doors.

Now you should go ahead and remove the batteries from your remote control. This will prevent you from having to open the garage door while it is powered by batteries. If you think that you may want to add more batteries you may want to do that before proceeding. Otherwise, you will have to power it up manually.

The last step involved in doing garage door repair in Sterling Virginia is to use lubricants and sealants to your tracks as well as the pulley system. These lubricants will ensure that your door will not slip even if you have heavyweights or other items on the door. For the sealant, you will need oil as well as water. Apply the lubricant to the tracks, as well as to the rubber seals. Make sure that the area surrounding the door is well-oiled.